Click on image to enlarge 
  • Year: 2018
  • Call for Price
  • Located in ON, Canada
  • Hull Material: Fiberglass
  • Engine/Fuel Type: Single diesel
  • YW# 12264-2860293

Other photos: Photo 1, Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19.

Conceived as a stylish but practical day cruiser with accommodation for occasional longer ventures, the Abaco 40 will find favour with those who want fine sea keeping and performance in a boat with classic aesthetics.

The hull configuration, which utilizes broad chine flats aft on a modified deep vee form, was first proven in a 39-footer built by Bruckmann in 1994. The hull type gets on a level plane at 12 knots and is extremely fuel efficient from the mid-teens on up. Stability and an easy ride and motion are also characteristic of this form. The first boat of the Abaco series is powered by a single Cummins 670 HP diesel and will cruise in the low 20 knot range with a top speed of approx. 30 knots. The single propeller and rudder are protected by a skeg which also aids this hull type's well known excellent tracking ability. The Abaco 40 will also be available in twin engine pod drive form with a top speed in the high 30's.

Given the purpose of the design, the accommodation length given over to the cockpit and salon/bridge deck is intentionally large. The facing settees in the salon are convertible to berths should that be necessary and the large cockpit seats provide a fine platform for putting one's feet up while reading in the shelter of the pilot house roof overhang. The seats, as in a sailboat cockpit, also provide plenty of stowage space. If a fishing or open cockpit is required, these seats can be eliminated. The machinery space located under the salon is accessed by large hatches in the sole and from forward by raising the steps that lead below. The ample galley on the port side has excellent air and light, being open overhead to the pilothouse windshield. The head and shower compartments are located to starboard, forward of the helm station. A vee berth cabin with bureau, hanging locker' and 'aircraft lockers' are forward. An island double can be substituted for the v-berth.

The Abaco 40 is being built on a limited series basis by Bruckmann Yachts of Mississauga, Ontario. The hull and deck are of foam cored FRP construction. The Bruckmann yard has built an enviable reputation for attention to construction and system details as well as aesthetic sense in fit and finish. As in other projects, that ability combined with the use of modern design with good classic styling have produced a boat of real appeal to the knowledgeable boater.

For further information or to make an appointment to view this vessel, please contact either Grant or Pat Bowlby at Harris & Ellis' Gananoque Office at 613-659-3344 or by email at

Please contact Grant and Pat Bowlby, CPYB at 613-659-3344

Contact Harris & Ellis Yachts.

3029 Seneca Drive
Oakville, ON L6L 1A8 Canada
Tel (416) 562-4856
Fax (888) 263-1189
Contact Us